Take Me Back To Home PageGo To The Technical Data PageGo To The Masking Guide For Temporary Solder MasksGot To The Frequently Asked QuestionsE-mail Us At Contronic Devices Inc.Go To The Products PageGo To The Material Safety Data Sheet Page

Contronic Devices Inc.

Products:

Category:

Part Numbers:

Description:

Application:

Removal:

Shelf Life:

Storage:

Other Products:

KAPTON SMT (SOLDER MASK TAPE)

SOLDER MASK TAPE

" Width 3105

" Width 3108

1" Width 3110

1 " Width - 3114

Kapton SMT Solder Mask Tape is designed to protect flat surface areas like Gold fingers and edge connectors on the circuit board during the wave solder operation. Kapton Tape is made of a polyamide film with a silicone adhesive. It is chemical and heat resistant to withstand short exposures to 525F (274C).

Kapton SMT Solder Mask Tape allplies directly from the roll to the surface to be masked. The applied surface should be free of dirt, oil and any other parting agents.

Kapton SMT Solder Mask Tape simply peels off after use.

Kapton SMT Solder Mask Tape will store up to 2 years from date of manufacturing.

Kapton SMT Solder Mask Tape should be Stored at room temperature (72F, 22C) in an unopened container.

Other specialized masking materials are available upon request.

[Welcome] [Tech Data] [Guide] [FAQ'S] [Products] [Contact Us] [MSDS]

This Website was designed and is maintained by GLENARDS WEBDESIGN

Questions, Comments or To Place An Order?

E-mail: Contronic Devices Inc.

Phone: (714)897-2266

Fax: (714)897-6262

Copyright © 2003 by Contronic Devices Inc. All rights reserved.