Take Me Back To Home PageGo To The Technical Data PageGo To The Masking Guide For Temporary Solder MasksGot To The Frequently Asked QuestionsE-mail Us At Contronic Devices Inc.Go To The Products PageGo To The Material Safety Data Sheet Page

Contronic Devices Inc.



Part Numbers:




Shelf Life:


Other Products:


Water Soluble Solder Mask

8 oz. Bottle - 3730 Gallons - 3750

WSM-70 is a blue water-soluble polymer that cures at room temperature.  This material is formulated to resist the adhesion of solder to specified areas of the circuit board during the soldering operation.  After the solder operation, WSM-70 can be removed with hot water (140F, 60C) leaving no residue.  WSM-70 is developed for use with rosin fluxes and organic fluxes. This product is not to be used with inorganic acid fluxes.

WSM-70 is applied using a plastic squeeze bottle or by brush. Drying time varies according to mask thickness and relative humidity. Warm or cold dry air will quicken the drying time. Optimum coating thickness is 10 to 35 mils (.025 1 mm). For a thinner viscosity, water may be addes up to 2% by weight.

WSM-70 is completely soluble in hot water, leaving no residue on the circuit board.

WSM-70 can be stored up to one year from the date of manufacturing at room temperature (72, 22C).

WSM-70 can be stored at room temperature in an unopened container.

Please refer to Technical Data Bulletin #TD9000-The Complete Masking Selection Guide

[Welcome] [Tech Data] [Guide] [FAQ'S] [Products] [Contact Us] [MSDS]

This Website was designed and is maintained by GLENARDS WEBDESIGN

Questions, Comments or To Place An Order?

E-mail: Contronic Devices Inc.

Phone: (714)897-2266

Fax: (714)897-6262

Copyright © 2003 by Contronic Devices Inc. All rights reserved.