Take Me Back To Home PageGo To The Technical Data PageGo To The Masking Guide For Temporary Solder MasksGot To The Frequently Asked QuestionsE-mail Us At Contronic Devices Inc.Go To The Products PageGo To The Material Safety Data Sheet Page

Contronic Devices Inc.

Products:

Category:

Part Numbers:

Description:

Application:

Removal:

Shelf Life:

Storage:

Other Products:

PC FLEX-MASK 001-GA

TEMPORARY SOLDER MASK FOR AUTOMATED DISPENSING EQUIPMENT

Gallon 1250

8 oz. Bottle - 1230

PC Flex-Mask 001-GA is a green single-component natural latex rubber that cures at room temperature.  This material is formulated to use with automated dispensing equipment. It will withstand temperatures up to 268C/515F during the normal soldering operation (not to exceed 5 seconds). Once used, this material is manually peeled off and discarded.

PC Flex-Mask 001 GA is applied using an automated dispensing equipment with a minimum .010 ED needle.

PC Flex-Mask 001 GA removes easily by hand or tweezers.  Simply lift one corner and pull. A slight lifting action will remove PC Flex-Mask 001 GA all in one piece leaving no residue.  For best results, PC Flex-Mask 001 GA should be removed as soon as possible after the cleaning operation.

PC Flex-Mask 001 GA has a shelf life of 6 months from date of manufacture. Each container is stamped to show the batch number, date of manufacture and expiration date.

PC Flex-Mask 001 GA  must be protected from freezing.  Store at room temperature in an unopened container.

PC Flex-Mask 001 GA is available in different viscosities and colors. Please refer to Technical Data Bulletin #TD9000 The Complete Masking Selection Guide.

[Welcome] [Tech Data] [Guide] [FAQ'S] [Products] [Contact Us] [MSDS]

This Website was designed and is maintained by GLENARDS WEBDESIGN

Questions, Comments or To Place An Order?

E-mail: Contronic Devices Inc.

Phone: (714)897-2266

Fax: (714)897-6262

Copyright © 2003 by Contronic Devices Inc. All rights reserved.